Support for MFC-L9630CDN
- Replace the Toner Cartridge
- No Toner
- The message "Retry Updating by USB", "Retry by USB" or "Try updating by Firmware Update tool." appears on the machine's LCD when the machine is turned on.
- Too Many Trays
- Cannot Scan ##
- Replace the Waste Toner Box
- Unusable Device
- Drum !
- Out of Memory/Print Data Full
- Document Jam
- Paper is Jammed Inside the Machine
- Replace the Drum Unit
- Wrong Toner Cartridge
- Media Type Mismatch or Media Mismatch
- Toner Error
- Cartridge Error
- I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- Storage Full
- Condensation
- Tray 2 Error / Tray 3 Error / Tray 4 Error
- Cannot Print ##
- Cannot Detect
- Toner Low
- Cooling Down
- Paper is Jammed in the 2-sided Tray
- Paper is Jammed in the Back of the Machine Show More Show Less
- Replace the Toner Cartridge
- No Toner
- Too Many Trays
- Cannot Scan ##
- Replace the Waste Toner Box
- The printer status is Offline or Paused.
- Unusable Device
- Drum !
- Out of Memory/Print Data Full
- Document Jam
- Paper is Jammed Inside the Machine
- Replace the Drum Unit
- Wrong Toner Cartridge
- Media Type Mismatch or Media Mismatch
- Toner Error
- Cartridge Error
- Storage Full
- I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
- Condensation
- Tray 2 Error / Tray 3 Error / Tray 4 Error
- Cannot Print ##
- Cannot Detect
- Toner Low
- Cooling Down
- Paper is Jammed in the 2-sided Tray
- Paper is Jammed in the Back of the Machine Show More Show Less
Other FAQs Category
A guide to navigating our most common questions