Support for HL-1210W
- I cannot print using my Brother machine on a wireless network (Mac)
- I get a TS error when trying to print on a wireless network.
- My Brother machine could not be found over the network when I installed drivers on my PC.
- I cannot print using my Brother machine on a wireless network (Windows)
- I cannot connect my machine to the wireless network (For Windows)
- I cannot repair the wired or wireless connection using the Network Connection Repair Tool (Windows)
- My Brother machine cannot be used after the access point/router is replaced or the settings are changed
- I cannot connect my machine to the wireless network (For Macintosh) Show More Show Less
- Configure the Brother machine for a wireless network using automatic wireless mode (Wi-Fi Protected Setup™ or AOSS™)
- Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM without a USB cable.
- Setup a Brother machine on a wireless (Wi-Fi) network using the supplied CD-ROM with a USB cable.
- Print a Printer Settings page.
- Set up your Brother machine on a wireless network (Windows/macOS)
- (Video) Setup a Brother machine on a wireless (Wi-Fi) network.
- Print the WLAN report
- Verify the Brother machine connected to the Wireless Network (For Windows)
- Important points you need to confirm before configuring your Brother machine for a wireless network.
- Discover the MAC address of the Brother network card
- Find the Wireless Security Information (e.g. SSID, Network key etc.) for Mac OS X 10.10.5 or greater
- Enable the Brother machine's network interface.
- Verify the Brother machine connected to the Wireless Network (For Macintosh)
- Find the Wireless Security Information (e.g. SSID, Network key etc.) for Windows
- What is the default password for my Brother network card, BRAdmin, Remote Setup or Web Based Management?
- Reset the network settings to the factory default Show More Show Less